Filter
Top Products
8 TopAccess ADMINISTRATION TAB PAGE - SETUP
MENU (Scanning Function)
82 Setting up Save As File Settings
4) Port Number (Command)
When you select "FTP" as the protocol, enter the port number to be used for command exe-
cution.
Remain "-", which has been set as the default, for the control port. If so, the port number, that
has been set in the "FTP Client" in the Network menu page of the Setup tab, will be used.
Change this option if you want to use another port number.
5) Network Path
If you select SMB as the protocol, enter the network path to the network folder. For example,
to specify the "\\192.168.1.1\user\scanned" folder, enter "\\192.168.1.1\user\scanned".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/scanned" FTP folder in the FTP server, enter
"user/scanned".
If the SMB protocol is selected, specify a computer to which the static IP address is
assigned.
6) Login User Name
Enter the login user name to access a SMB server or an FTP server, if required. When you
select "FTP" as the protocol, an anonymous login is assumed if you leave this field blank.
7) Password
Enter the password to access a SMB server or an FTP server, if required.
8) Retype Password
Enter the same password again for the confirmation.
9) Allow user to select network folder to be used as a destination
Select this to allow users to specify a network folder as a destination for the Inbound FAX
routing by TSI, Template, Fax Received Forward and Internet Fax Received Forward.