Toshiba e-STUDIO28 All in One Printer User Manual


 
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver
User’s Guide 12
Printer Port/Remote Queue
o On server install type, Printer Port is the Fiery printer port on the
remote printer device.
o On client install type, Remote Queue is the server-type print queue on
the UNIX/Linux Network Server.
o This is print, by default.
Remote Server OS
o Shown on client type installation, this specifies the type of operating
system in the remote Network Server. This is needed in an HP-UX
installation for enabling the client print queue.
Install Manpage
o This enables/disables installation of the documentation man pages. This
also enables/disables the manpage path fields in the Advanced tab.
Set as default
o This enables/disables making the print queue the default print queue.
Install User Interface setup program
o This enables/disables installation of the rcutil configuration program.
NOTE: The user may opt not to install the rcutil on systems without
graphics capability, for instance, if Motif is not supported.
Advanced Tab
Enable three-digit request number
o This is for HP-UX client type installation only: This specifies whether to use
or not use the lpadmin option –ob3 when creating the client print queue in
the HP-UX system. We have observed that sometimes, -ob3 is required to
enable printing in a newly installed print queue. You may want to try the On
or Off case to check which setting enables printing, If you still can’t print,
please inform us.
o Please refer to the manpage of lpadmin for the use of –ob3 option.
Driver Path
o For HPUX, Solaris, and AIX, a model script or backend script is installed on
the system on the directory specified by the Driver Path. This location may
be different from the default location for the driver files, which is
/usr/local/tsbprn, or /etc/lp/interfaces/tsbprn in Solaris. If the
Fi
g
ure 4
A
dvanced tab