Filter
Top Products
69
Getting Started
Using external display devices
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
() +
P keys:
Press the ( ) +
P keys repeatedly until the setting you want takes
effect. Briefly pause each time you press the ( ) +
P keys to allow
time for the display to change.
This cycles through the settings in the following order (the last two
options are available if an external monitor is connected):
❖ PC screen only
❖ Duplicate
❖ Extend
❖ Second screen only
(Sample Image) Display options window
The ( ) + P keys navigate through the options without activating a
selection. Press ENTER to activate a selection.
NOTE
NOTE