Filter
Top Products
User’s Manual
4-20
O
PERATING
B
ASICS
◆ When multiple drives that can write data to discs are connected, be careful
not to write to the wrong drive.
◆ Be sure to connect the universal AC adaptor before you write or rewrite.
◆ Before you enter standby/hibernation mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
◆ Be sure to close all other software programs except the writing software.
◆ Do not run software such as a screen saver, which can put a heavy load on
the CPU.
◆ Operate the computer in the full-power mode. Do not use power-saving fea-
tures.
◆ Do not write while virus check software is running. Wait for it to finish, and
then disable virus detection programs including any software that checks
files automatically in the background.
◆ Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
◆ Write from the computer’s HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
◆ Writing with software other than RecordNow! is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/RW,
DVD-R/-RW/-RAM, DVD+R/+RW or DVD+R DL disc.
◆ Do not perform any of the following actions:
◆ Change users in the Windows XP operating system.
◆ Operate the computer for any other function, including use of a mouse
or Touch Pad, closing/opening the LCD panel.
◆ Start a communication application such as a modem.
◆ Apply impact or vibration to the PC.
◆ Install, remove or connect external devices, including the following: PC
card, USB devices, external display, i.LINK devices, optical digital
devices.
◆ Use the Audio/Video control button to reproduce music or voice.
◆ Open the CD-RW/DVD-ROM, DVD+-R/+-RW or DVD Super Multi
drive.
◆ Do not use shut down/log off and standby/hibernation while writing or
rewriting.