Filter
Top Products
2-5
Back side
T
HE
G
RAND
T
OUR
Note: When multiple IEEE1394 devices are connected to a PC, the
devices may not correctly be identified. This problem may occur
when Windows
®
XP is restarted while the devices are connected or
when the power to the IEEE1394 devices is turned on before the PC
is turned on. If it occurs, disconnect the IEEE1394 cables and then
reconnect them.
Back side
Figure 2-4 shows the computer’s back side.
Figure 2-4 The computer’s back side
i.LINK (IEEE
1394) Port
Connect an external device, such as a digital video cam-
era to this port for high-speed data transfer. Some mod-
els are equipped with a i.LINK port. (Provided with
some models)
Video-out jack Plug a 4-pin S-Video connector into this jack.
Modem jack In areas where an internal modem is installed as stan-
dard equipment, there is a modem jack that lets you use
a modular cable to connect the modem directly to a tele-
phone line. The modem is not supported in some mar-
keting regions.
MODEM JACK
VIDEO-OUT
JACK
DC IN 15V
LAN
JACK
SECURITY LOCK SLOT