Filter
Top Products
4 Replacement Procedures
4.9 Expansion Memory
Removing the Expansion Memory
To remove the memory module, make sure the computer is in boot mode then remove the
wireless LAN compartment cover:
1. Push the latches securing the memory module to the outside to release it. A spring will force
one end of the module up.
2. Grasp the module and pull it out.
3. Seat the cover and secure its screws.
Figure 4-13 Removing the expansion memory
CAUTION: Do not touch the connectors on the expansion memory or on the
computer. Debris on the connectors may cause memory access problems.
Satellite M60 Series Maintenance Manual
[CONFIDENTIAL]
4-27