Filter
Top Products
4 Replacement Procedures
4.14 Speakers
Removing the Speakers
To remove the speakers, first remove the top cover, then follow the steps below:
1. Remove the four M2.5x4 screws.
2. Disconnect the speaker cable from the system board.
Figure 4-21 Removing the speakers
3. Lift out the speakers.
Installing the Speakers
To install the speakers, follow the steps below and refer to the figure in the preceding section:
1. Seat each speaker.
2. Secure each speaker with four M2.5x4 screws.
Satellite M60 Series Maintenance Manual
[CONFIDENTIAL]
4-39