Filter
Top Products
4 Replacement Procedures
4.16 Fan & CPU
Removing the Fan & CPU
To remove the Fan, Heat Sink, and CPU, you must first remove the panel, keyboard, top cover
and bottom chassis to reveal the system board, then follow the steps below:
1. Remove two M2.5x4 fan screws and then lift out the fan.
Figure 4-24 Removing the hexagonal screws
2. Remove four M2.5x4 screws securing the CPU bracket and heat sink, then lift them out.
Satellite M60 Series Maintenance Manual
[CONFIDENTIAL]
4-43