Filter
Top Products
4 Replacement Procedures
4.18 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the display assembly and display mask, then follow the
steps below.
1. Remove two M2x3 black screws securing the LCD cable and FL inverter board.
2. Disconnect the LCD cable from the FL inverter board.
3. Remove two M2.5x6 black screws securing the LCD module bracket to LCD cover.
4. Lift it out.
Figure 4-27 Removing the LCD module-1
4-48
[CONFIDENTIAL]
Satellite M60 Series Maintenance Manual