Filter
Top Products
4 Replacement Procedures
4.19 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, the display assembly, display
mask, and LCD module, then follow the steps below.
1. Remove one M2x3 black screw securing the FL invert board to the LCD display assembly.
Figure 4-28 Removing the FL inverter board
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to the figure in the preceding
section..
1. Secure one M2x3 black screw connecting the FL inverter board to the LCD display
assembly.
2. Reassemble the computer.
Satellite M60 Series Maintenance Manual
[CONFIDENTIAL]
4-51