Filter
Top Products
198
Toshiba Utilities
Fingerprint Authentication Utility
5.375 x 8.375 ver 2.3
Once the TPM files have been installed, you will need to
enable the TPM feature through your system’s BIOS.
To enable TPM:
1 Power on your system while holding down the
Esc key.
2 Press
F1 when directed.
3 Press the
PgDn key.
4 Press the down arrow key until TPM is highlighted, then
press the space bar to change the TPM status to Enabled.
5 Press
Y to save the changes.
6 Press
End and then press Y to accept the changes.
Your system will restart.
For further information on how to set up and use this utility,
see the Infineon TPM (Trusted Platform Module) Installation
Guide.
Fingerprint Authentication Utility
(Available on certain models)
The fingerprint authentication utility (available on certain
models) can be used to replace the keyboard-based user/
BIOS password authentication system when booting up.
The fingerprint authentication utility can also be used for user
logon. The user’s fingerprint is read; if the system recognizes
the fingerprint, the user is automatically logged on.