Filter
Top Products
User’s Manual 3-11
Getting Started
Standby Mode limitations
Standby Mode will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
Restarting the computer
Certain conditions require that you reset the computer, for example if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are two ways this can be achieved:
1. Click Start then click Turn Off Computer. From the Turn Off Computer
menu select Restart.
2. Press the power button and hold it down for five seconds. Wait ten to
fifteen seconds, then turn on the power again by pressing the power
button.
System Recovery Options
A hidden partition is allocated on the hard disk drive for the System
Recovery Options.
This partition stores files which can be used to repair the system in the
event of a problem.
The System Recovery Options feature will be unusable if this partition is
deleted.
You can use TOSHIBA Recovery Disc Creator when you connect External
ODD.