Filter
Top Products
User’s Manual v
P300/P300D Series
Working environment
This product was designed to fulfill the EMC (Electromagnetic
Compatibility) requirements for "residential, commercial and light industry
environments".
The following environment is not approved:
In the following environments the use of this product can be restricted:
■ Industrial Environments (e.g. environments where a mains voltage of
380V three-phase is being used).
■ Medical Environments: This product is not certified as a medical
product according to the Medical Product Directive 93/42/EEC, but can
be used in office areas where the use is not restricted. Please disable
the wireless LAN or Bluetooth hardware in such areas as long this
feature is not official supported by the operator of the related medical
facility.
■ Vehicle Environments: Please read the operator's manual of the vehicle
manufacturer for further restrictions of use.
■ Aircraft Environments: Please follow the advices of the flight personnel
regarding restrictions of use.
Any consequences resulting from the use of this product in working
environments that are not approved or the use is restricted are not the
responsibility of Toshiba Corporation. The consequences of the use of this
product in those working environments may be:
■ Interference with other devices or machines in the nearby surrounding
area
■ Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the nearby surrounding area
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
Modem warning notice
Conformity Statement
The equipment has been approved to [Council Decision 98/482/EC -
"TBR 21"] for pan-European single terminal connection to the Public
Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in the
first instance.