Filter
Top Products
30
GB
TF 461TOSHIBA
Set resolution
In its basic setting, your fax machine uses
high resolution for transmitting or copying
your documents. You can however also
adjust the resolution to suit the particular
documents. Use the following as a rough
guide:
STD For hand-written or typewritten
documents
FINE For documents with small type
such as newspapers and
diagrams
SF For documents with very small
and detailed diagrams
GREY 64 grey stages for photographs
or colour documents
Higher resolution has an impact
on transmission time!
To change the resolution, press
the RESOLUTION key several
times. The LEDs above this key
indicate the set mode:
Lamp Mode
FINE off Standard mode
GREY off
FINE on Fine mode
GREY off
FINE on Superfine mode
GREY on
FINE off Grey stage mode
GREY on
Redial
If it was not possible for your fax message
to be sent, this may be due to various
reasons (please read page 55). One
reason may be that the other fax machine
is busy. In this case, it would make sense
to call your partner again at a later time.
This is done automatically by your fax; it
attempts to send the fax message again
approx. every three minutes.
If you have established a
connection via the HOOK key,
you can redial a number using
the REDIAL/PAUSE key.
Transmit documents
Transmit documents