Filter
Top Products
41
Operations
40
■ The display setting menu
Use this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
(Full): Display with 1024 × 768 dot resolution
(Thru):
Display with sampling resolution (for computer input only)
(Wide): Wide-screen display
Select one of the languages below to use for displaying the menu and messages
[ or : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/Português/ /
Svenska/Türkçe/Polski/ / / /
Screen to display when there is no input signal
[ or : Enter setting mode] [ :Selection] [Apply: ]
Logo/Blue/None
Display icons as function guides On Off
Sound a beep when operation is done. On Off
Display start-up screen when power is turned on On Off
Display a logo customized by the user for the start-up screen or when
there is no input signal.
[ or : Enter setting mode] [ : Selection]
Logo registration Press to display the registration menu.
Display style
Background Black Blue White
Logo confirmation Press .
Reset logo Yes No
Description
Item
Screen size
Language
Background
Icon
Beep
Start-up screen
User logo
Detailed description
[Screen size]
• If “Thru” is selected for [Screen size], portions exceeding the native resolution
(1024 × 768 pixels) will not appear on the screen. Note that for RGB signals with
clock frequency 140MHz or lower, all input pixel signals are sampled. However, if
the clock speed is higher than this, the RGB pixel signal is thinned before
sampling.
• If you use the screen size setting function on commercial video software,
broadcast or cable-broadcasting programs to display images with the varying
aspect ratio except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
Description
Digital (DVI)
Analog (D-SUB)(BNC)
Item
RGB Y/PB/PR RGB Y/PB/PR
Video
S-video PC card USB
Clamp 1 Adjusts the clamp pulse position. No No Yes No No No No No
Lower
Higher
Clamp 2 Adjusts the clamp pulse width. No No Yes No No No No No
Narrower
Wider
Equalizer Reduce noise on the screen. Yes Yes No No No No No No
Adjust with
.
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43].
*2: [Noise reduction] may not work depending on signal type.
*3: [NTSC mode] is set to JAPAN when the language is set to Japanese. It is set to US for other
languages.
Using the menus (Continued)