Toshiba (T)XM6401B/F1 Computer Drive User Manual


 
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 3
Installing CD-ROM
B
efore you begin to install your CD-ROM, make sure you
have the items listed below. In most cases, these items will
not come with your CD-ROM. See your local computer re-
tailer to purchase them.
INSTALLATION REQUIREMENTS
CD-ROM Software Driver (when installing on a PC the software
driver must be written for the SCSI host adapter card you have
installed in your computer system)
SCSI Host Adapter Board (PC systems only)
SCSI Interface Cable
External Terminator (TXM6401F1 installations only)
Power Cord (TXM6401F1 installations only)
INSTALLING AN INTERNAL CD-ROM (XM-6401B)
The instructions that follow are for use on PC systems only. In order
to install your internal CD-ROM successfully, you will need to com-
plete the following steps:
Install SCSI host adapter board in your computer system (if not
already installed).
Set jumper settings on CD-ROM.
Install CD-ROM inside your computer.
Using a SCSI cable, connect CD-ROM to SCSI interface card.
Connect +5/+12V power cable to internal CD-ROM drive.
Connect a sound cable to your CD-ROM (optional).
Load CD-ROM driver software (driver is obtained from your SCSI
host adapter manufacturer).