Filter
Top Products
Power on Power off
(no operation)
AC adaptor
not
connected
Remaining
battery capacity
is above low
battery trigger
point
• Operates
• LED:
Battery off
Power white
Remaining
battery capacity
is below low
battery trigger
point
• Operates
• LED:
Battery
flashes amber
Power white
Remaining
battery capacity
is exhausted
Computer shuts
down
Monitoring of power condition
As shown in the below table, the Batteryand Power indicators on the
system indicator panel alert you to the computer’s operating capability and
battery charge status.
Battery indicator
Check the Battery
indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
Flashing amber The battery charge is low, the AC adaptor must
be connected in order to recharge the battery.
Amber Indicates the AC adaptor is connected and the
battery is charging.
White Indicates the AC adaptor is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery
indicator will go out. When the battery pack's
temperature falls to a normal range, charging will resume - this process will
occur regardless of whether the computer's power is on or off.
TOSHIBA WT200
User's Manual 5-
2