Filter
Top Products
Replacement Procedures
Figure 4-6-3 Disassemble the bracket from slot in ODD
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive.
1. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
M2.02.0 Flat BIND screw x4
2. Insert an optical disk drive assembly into the slot and connect it to the connector
CN26 on the system board and secure it with the following screws.
M2.03.0B FLAT BIND screw x2
3. Secure Motherboard with following screws.
M2.56.5B FLAT BIND screw x3
Qosmio X500 Maintenance Manual (960-Q08) 4-20