Filter
Top Products
Replacement Procedures
4.7 HDD (SECOND HDD)
Removing second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for removing the second HDD (See Figure 4-7-1 to 4-
7-3).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws securing a HDD slot cover and remove a HDD slot
cover.
M2.54.0B FLAT BIND screw x2
3. Remove the following screws securing the HDD assembly.
M2.53.0B FLAT BIND screw x2
4. Disconnect the HDD assembly from the connector on the system board.
Figure 4-7-1 Turn the computer upside down
Qosmio X500 Maintenance Manual (960-Q08) 4-21