Filter
Top Products
Replacement Procedures
4.14 Top Cover assembly
Removing the Top cover assembly
The following describes the procedure for removing the top cover assembly (See Figure 4-
14-1 to 4-14-3).
1. Turn over the computer.
2. Remove the following screws securing the top cover assembly from the back and
bottom of computer.
M2.52.0 FLAT BIND screw Back x5
M2.56.5 FLAT BIND screw Back x11
M2.58.0 FLAT BIND screw Back x6
M2.54.0 FLAT BIND screw Back x2
M2.53.0 FLAT BIND screw Back x1
Figure 4-14-1 Remove the screws (back)
Qosmio X500 Maintenance Manual (960-Q08)
4-42