Filter
Top Products
Troubleshooting Procedures
2-64 PORTEGE Z830 Satellite Z830 Series Maintenance Manual (960-883) [CONFIDENTIAL]
Note:
■ When you connect a television or external monitor to the HDMI port, the display output
device is set to HDMI.
■ When you unplug the HDMI cable and re-plug it, please wait at least 5 seconds before you
re-plug the HDMI cable again.
■ When you change the display output device by hot key like FN + F5, the playback device
may not switch automatically. In this case, in order to set the playback device to the same
device as the display output device, please adjust the playback device manually by the
following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want to switch to.
3. To use the internal speakers on your computer, select Speakers. To use the television or the
external monitor that you have connected to the computer, select a different playback
device.
4. Click the Set Default button.
5. Click OK to close the Sound dialog.
Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following settings otherwise you
may find that nothing is displayed.
Note:
■ Be sure to use the FN + F5 HotKey to select the display device before starting to play
video. Do not change the display device while playing video.
■ Do not change the display device under the following conditions.
■ While data is being read or written.
■ While communication is being carried out.