Filter
Top Products
4 Replacement Procedures 4.9 System board/Wireless LAN card
4-34 [CONFIDENTIAL] PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
Removing the System board/Wireless LAN card
To remove the system board/wireless LAN card, follow the steps below and refer to Figure
4-15 to 4-16.
1. Peel off the glass tape.
2. Disconnect the KB BL flexible cable, KB flexible cable, TP board FFC, speaker
harness and LCD harness from the connectors CN3241, CN3230, CN9550,
CN6000 and CN5300 on the system board.
Figure 4-15 Removing the system board (1)
KB BL flexible cable
(Connected to CN3241)
KB flexible cable
(Connected to CN3230)
TP board FPC
(Connected to CN9550)
Speaker harness
(Connected to CN6000)
LCD harness
(Connected to CN5300)
SQUARE cushion
Glass tape