Filter
Top Products
Tests and Diagnostics
3-12 [CONFIDENTIAL]) PORTEGE Z830 Satellite Z830 Series Maintenance Manual (960-883)
After the work for procedures 1-3 is completed, the following test program
menu is displayed.
Repair test program
1. DMI Entry utility
2. Repair Heatrun (T&D)
3. Repair Main (T&D)
4. BIOS (VX.XX) it is the latest
5. EC/KBC (VX.XX) it is the latest
To start the Diagnostics menu (T&D), press 3 and Enter.
To start the H/W initial information setting tool, press 1 and Enter.
To start the Heatrun test, press 2 and Enter.
NOTE: When replacing the system board, be sure to execute the following procedures.
1. Before replacing the system board, execute subtest03 “DMI information
save” in 3.3 Setting of the hardware configuration in order to save the DMI
information from system board to floppy disk.
2. After replacing the system board, execute the subtest04 “DMI information
recovery” and subtest08 “System configuration display” in 3.3 Setting of the
hardware configuration in order to copy the DMI information and system
information from the floppy disk.