Filter
Top Products
TL-PS110U Single USB2.0 Port Fast Ethernet Print Server
20
11. Enter the “Internet Protocol (TCP/IP) Properties” page as shown in Figure 3-32. Fill in the
following par
ameters.
¾ IP Address: Specify an IP address for your adapter. The IP address must be within the
same subnet as your Router. For example, if the LAN IP address of your Router is
192.168.1.1, the IP address should be set to 192.168.1.X (1<X<10 or 10<X255, for
192.168.1.10 has been specified for your print server). Here we take 192.168.1.101 for
example.
¾ Subnet Mask: Enter the subnet mask of your network.
¾ Default Gateway: Enter the LAN IP address of your wireless router or access point. Here
takes 192.168.1.1 for example.
Figure 3-32
12. Add a Standard TCP/IP port for the printer.
¾ If you’ve already installed the printer on your computer, please refer to 3.4.1 If You Have
Installed A Printer Before to add a Standard TCP/IP port.
¾ If you never install a printer on your computer, please refer to 3.4.2 If You Never Install A
Printer Before to add a Standard TCP/IP port.
3.3 Using Web Management Page on MAC OS
1. Click the Apple Icon on the left side of the top-bar, and then choose System Preferences.