Filter
Top Products
TL-PS110U Single USB2.0 Port Fast Ethernet Print Server
42
4.2.3 TCP/IP
Figure 4-6
¾ Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a
DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related
settings automatically from your DHCP server.
¾ IP Address: This option allows you to view IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment. (default: 192.168.0.10)
¾ Subnet Mask: This option allows you to view subnet mask from the print server.
¾ Gateway: This option allows you to view gateway from the print server.
4.3 Setup
The Setup page allows you to configure general system settings of he print server. By clicking the
corresponding tab, you can configure the following items, including System, Wireless, and
TCP/IP.
4.3.1 System
Click System, the following screen will appear.