TL-PS110U Single USB2.0 Port Fast Ethernet Print Server
1
Chapter 1. Introduction
1.1 Product Overview
The external print servers enhance capability by letting you place your printers at convenient
locations directly on the Ethernet network, and by increasing network printer performance and
management. Please note that the print server does not support printing with host-based printers,
e.g. CAPT, GDI, PPA.
1.2 Components and Features
¾ One USB2.0 port
¾ Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX
¾ One Setup CD contains driver and manual for Windows system
¾ One external AC power adapter
¾ Built-in Reset Button
¾ One Quick Installation Guide
1.3 LED Indicator
LED Status Indication
Status Blinking (Orange)
When power switched on, the Status indicator will flash five
times, and then on.
100Mbps On (Green) LAN Port has a valid network connection at 100Mbps.
10Mbps On (Orange) LAN Port has a valid network connection at 10Mbps.
On (Green) Connect with USB2.0 printer
USB
On (Orange) Connect with USB1.1 printer
)Note:
The Status LED should be flash five times when POST. If not, please contact your local dealer for
repair or replacement.
1.4 Factory Defaults
¾ Username: admin
¾ IP Address: 192.168.0.10
¾ Subnet Mask: 255.255.255.0
)Note:
The TL-PS110U is produced without password by default.