112
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable mc-rate
storm-control disable ul-rate
Description
The storm-control disable ul-rate command is used to disable the UL-Frame
control.
Syntax
storm-control disable ul-rate
Command Mode
Interface Configuration Mode(interface ethernet / interface range ethernet)
Example
Disable the UL-Frame control for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable ul-rate
port rate-limit
Description
The port rate-limit command is used to configure the Rate Limit for an Ethernet
port. To disable the Rate Limit, please use no port rate-limit command.
Syntax
port rate-limit [ ingress ingress-rate ] [ egress egress-rate ]
no port rate-limit
Parameter
ingress-rate —— Specify the bandwidth for receiving packets.Range:1-102400
for the megaport, 1-1024000 for the gigaport
egress-rate —— Specify the bandwidth for sending packets. Range:1-102400
for the megaport, 1-1024000 for the gigaport
Command Mode
Interface Configuration Mode(interface ethernet / interface range ethernet)
Example
Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for port5: