Filter
Top Products
68
dot1x quiet-period
Description
The dot1x quiet-period command is used to enable the quiet-period function.
To disable the function, please use no dot1x quiet-period command.
Syntax
dot1x quiet-period
no dot1x quiet-period
Command Mode
Global Configuration Mode
Example
Enable the quiet-period function:
TP-LINK(config)# dot1x quiet-period
dot1x timer
Description
The dot1x timer command is used to configure the Quiet Period and the
SupplicantTimeout. To restore to the default, please use no dot1x timer
command.
Syntax
dot1x timer quiet-period period supp-timeout timeout
no dot1x timer
Parameter
period ——The value for Quiet Period, ranging from 1 to 999 in seconds. By
default, it is 10. Once the supplicant failed to the 802.1X Authentication, then the
switch will not respond to the authentication request from the same supplicant
during the Quiet Period.
timeout ——The maximum time for the switch to wait for the response from
supplicant before resending a request to the supplicant., ranging from 1 to 9 in
second. By default, it is 3.
Command Mode
Global Configuration Mode