Filter
Top Products
114
The show interface configuration command is used to display the
configurations of an Ethernet port, including Port-status, Flow Control,
Negotiation Mode and Port-description.
Syntax
show interface configuration { ethernet [interface] }
Parameter
interface —— The port selected to display the configurations. By default, the
configuration information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configurations of port5:
TP-LINK# show interface configuration ethernet 5
show interface status
Description
The show interface status command is used to display the connective-status
of an Ethernet port.
Syntax
show interface status { ethernet [interface] }
Parameter
Interface —— The port selected to display the connective-status. By default,
the connective-status of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the connective-status of all Ethernet ports:
TP-LINK(config)# show interface status ethernet
show interface counters
Description
The show interface counters command is used to display the statistic
information of an Ethernet port.