Filter
Top Products
Figure 3. Single Partition Screen
Figure 4. Two Partitions Screen
4. After the format process is finished unplug the JetFlash
™
from the computer. In order for the
new USB-HDD startup disk settings to take effect you must re-insert the JetFlash
™
and
enter the BIOS setup by restarting the computer (please refer to your computer user’s
manual on how to enter the BIOS).
5. Once you are in the BIOS go to the Advanced BIOS Features menu and change the First
Boot Device setting to USB-HDD. Select Save & Exit Setup and when you are prompted to
SAVE to CMOS and EXIT (Y/N)? type “Y” on the keyboard and press “Enter.”
14