Security Function
Mac™, or Linux™ Operating Systems do not support this feature.
Enabling the Security Function in Windows
®
98SE, Me, 2000 and XP
1. In order to enable the Security function you must select the “Format” button in the
JetFlash
™
mFormat Utility window.
WARNING! Formatting the Disk will erase all of the data on your JetFlash
™
2. Select a Type of format, Quick, Full, or Configure device only.
Type of Format
You have the option of performing a Quick, or Full format, or you may choose to just configure
the JetFlash
™
.
Quick: Scan all memory blocks on the Flash Disk. If there are bad memory blocks, mark
them as bad and perform a DOS format.
Full: Perform a Surface Scan on the Flash Disk that involves a Read/Write check. A
Read/Write check will create a report on any bad memory sector blocks. If there
are bad memory blocks, it marks them as bad and performs a DOS format.
Configure device only: This option partitions the JetFlash
™
and sets up Password
Protection and Boot-Up information. A USB disk DOS format
will be executed.
The Configure device only option cannot be setup in password protection.
3. Select the Enable password protection option in Disk 1.
16