Filter
Top Products
Mounting the Switch
The Modular Switch is suitable for use in an office environment
where it can be rack-mounted in standard EIA 19-inch racks or
standalone.
Desktop Installation
Set the Switch on a sufficiently large flat space with a power outlet
nearby. The surface where you put your Switch should be clean,
smooth, level, and sturdy.
Make sure there is enough clearance around the Switch to allow
attachment of cables, power cord and air circulation.
Attaching Rubber Feet
A. Make sure mounting surface on the bottom of the Switch is
grease and dust free.
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the Switch.
These footpads can prevent the Switch from shock/vibration.
Figure 4-1. Attaching Rubber Feet to each corner
on the bottom of the Switch
20