Filter
Top Products
Select IP Address on the Device page, and enter a unique IP
address for the switch, and press Enter. ( Default IP address is
192.168.16.1 )
Select Subnet Mask on the Device page, and enter the subnet mask
( IP Netmask ) address, and press Return. ( Default subnet Mask is
255.255.255.0 )
Select Default Gateway on the Device page, and enter the IP
address of the default gateway if you are sending packets to another
IP network, and press Return. ( Default Gateway is 192.168.16.254 )
Remember returning to the Main Menu to Save the previous settings,
and then Reboot the switch. You may have to press Enter again
when the switch is finished resetting.
Port Setting
This function is for port speed setup. For example, type “1” and “2” to select port
2 of modular 1.
26