Filter
Top Products
Afterwards, you click to select Port 4 and Port 5 for the purpose of
overlapping. Remember to click “ Apply “ button after you finish
your setting.
Now you have create two VLAN Groups ( Group1 VID=1 and
Group2 VID=2 ) with overlapping ports ( Port 4 & Port 5 ).
Tagging ( Mac Address based ) VLAN
This method of tagging is defined in the IEEE 802.1Q standard, to
configure switch port by the tagging function that allows the port to
transmit tagging frame. VLAN Tagging can only be used if the
devices at both ends of a link support IEEE 802.1Q.
The following example show you how to create 3 VLAN Groups with
one common tagged port.
67