Filter
Top Products
59
DHCP Connection
Click the DHCP Release button to release the router's IP address. The router will not respond
to IP messages from the WAN side until you click the DHCP Renew button or power-up the
router again. Clicking the DHCP Renew button causes the router to request a new IP address
from the ISP's server.
PPPoE, PPTP, L2TP Connection
Depending on whether the WAN connection is currently established, you can click either the
DHCP Renew to attempt to establish the WAN connection or the DHCP Release to break the
WAN connection.
BigPond Connection
Depending on whether you are currently logged in to BigPond, you can click either the DHCP
Renew to attempt to establish the WAN connection or the DHCP Release to break the WAN
connection.
Status_Wireless
The wireless section allows you to view the wireless clients that are connected to your
wireless router.
MAC Address
The Ethernet ID (MAC address) of the wireless client.
IP Address
The LAN-side IP address of the client.
Mode
The transmission standard being used by the client. Values are 11a, 11b, or 11g for 802.11a,
802.11b, or 802.11g respectively.
Rate
The actual transmission rate of the client in megabits per second.