Tripp Lite B020-016-17-IP Switch User Manual


  Open as PDF
of 45
 
21
7.7 Upgrading the Firmware
7.6.7 Date/Time
7.6.6 Customization
(
continued
)
7. Administation
(
continued
)
7.6 Administration Page
(
continued
)
Parameter Explanation
Reset on exit
Select this check box to reset the KVM switch and implement new settings when you log out. Following a reset, wait one to two
minutes before logging back in.
Note: For some changes the Reset on exit check box is automatically selected and the KVM switch will reset when you log out. Clearing the check mark before logging out will cause the new settings to be
discarded.
Reset Values
Clicking this button undoes all changes that have been made to the Configuration and Administration pages (except for port
names, usernames, and passwords) and returns the parameters to the original factory default settings (see section 14.2, OSD
Factory Default Settings).
Clear Name List This function clears the Port Names on the Main page.
TheDate/TimedialogboxletstheAdministratorsetuptheKVMswitch’s
time parameters:
AsnewversionsoftheNetDirectorConsoleKVMSwitchwithIPAccess
firmware become available, they can be downloaded from our Website at
www.tripplite.com
Note: Although upgrading the firmware isn’t on the OSD Administration page, it is an adminis-
trative function, so we will discuss it in this chapter.
To upgrade the firmware, do the following:
Downloadthenewrmwareletoacomputerthatisnotpartofyour1.
KVMswitchinstallation.
Fromthatcomputer,openyourbrowserandlogintotheNetDirector2.
ConsoleKVMSwitchwithIPAccess(seesection8.1,Logging In).
Click the 3. Firmware icon (see section 8.2, Webpage Layout) to open the
Firmware configuration dialog box:
Click 4. Browse;navigatetothedirectorythatthenewrmwareleisin
and select the file.
Click 5. Upgrade.
After the upload completes, click the 6. Logout icon to exit and reset the
KVMswitch.
Log Page
Clicking the Log tab brings up the contents of the log file. The log file is
discussed in Chapter 11.
IfyourcountryorregionemploysDaylightSavingTime(Summer•
Time), check the corresponding box.
ToestablishthetimezonethattheKVMswitchislocatedin,dropdown•
the Time Zone list and choose the city that most closely corresponds to
where it is at.
To set the year and day, use the Calendar graphic.•
Clicking < or > moves you backward or forward by one month incre-•
ments.
Clicking << or >> moves you backward or forward by one year incre-•
ments.
In the calendar, click on the day.•
Tosetthetime,usethe24hourHH:MM:SSformat.•
Click • Synchronize to save your settings.
 previous next