Tripp Lite PDUMNV20 Computer Hardware User Manual


 
10
Configuration and Operation
Remote Monitoring and Control
The PDU provides remote monitoring
A
,
outlet control
B
and more via Web browser,
telnet and SNMP-based Network
Management Systems. For more information
about configuration and operation of the
PDU via the PowerAlert Web browser
interface, refer to the SNMPWEBCARD User's
Guide, included on the CD-ROM bundled
with the PDU.
Features continued
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
A
and Status LED
B
indicate several operating conditions, as
shown in the table below. This port is not compatible with PoE
(Power Over Ethernet) applications.
Network Operating Conditions
A
Link LED Color
Off No Network Connection
Flashing Amber 100 Mbps Network Connection
Flashing Green 10 Mbps Network Connection
B
Status LED Color
Off Card Not Initialized
Steady Green Card Initialized and Operational
Flashing Amber Error - Card Not Initialized
A
B
A
B
201112142 933151.indb 10 1/24/2012 2:09:59 PM