Filter
Top Products
7
Press A to Accept the settings, or M to Modify? M
Enter the root password: *********
Reset configuration to default values (Y/N)? N
For each of the following questions, you can press <Return> to select the value shown in
braces, or you can enter a new value.
NETWORK INTERFACE PARAMETERS:
Should this target obtain IP settings from the network?[N] N
Static IP address [192.168.1.19]? 192.168.0.123
Static IP address is 192.168.0.123
Subnet Mask IP address [255.255.0.0]? 255.255.255.0
Subnet Mask IP address is 255.255.255.0
Gateway address IP address [192.168.1.1]? 192.168.0.1
Gateway address IP address is 192.168.0.1
You can also change the root password, real-time clock and other settings. (Tripp Lite
recommends against changing the default settings unless you are an advanced user with a
specific purpose.) After you have finished entering settings, the PDU will save changes to memory
and reboot (this may take several minutes). After the PDU reboots, the initialization page should
display the new static IP settings.
4-6
Remove Serial Cable: Remove the serial cable from the PDU and proceed to Step
5-1
.
Testing Network Connection
5-1
Access PDU with Web Browser:
After an IP address has been assigned
to the PDU, attempt to access it with a
Web browser that supports frames,
forms and Java™. Open a Web browser
on a computer connected to the LAN
and enter the IP address assigned to
the PDU. You should be prompted for a
password
A
. The user name is admin
and the default password is admin.
After you enter the user name and
password, the PowerAlert status page
B
will appear in the browser window.
For more information about
configuration and operation of the PDU
via the PowerAlert interface, refer to the
SNMPWEBCARD User's Guide, included
on the CD-ROM bundled with the PDU.
Note for Network Management System Users
Only: Two MIB files - Tripplite.mib and
RFC1628.mib - must be loaded on each
Network Management Station that will
monitor the PDU via SNMP. The files are
provided on the CD-ROM included in the
product package.
Installation continued
A
B
201112142 933151.indb 7 1/24/2012 2:09:56 PM