Filter
Top Products
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
Important Safety Instructions
Monitored Rack PDU Features
Switched Rack PDU Features
• The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise
protection for connected equipment.
• The PDU is designed for indoor use only in a controlled environment isolated from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
• The power requirement for each item of equipment connected to the PDU must not exceed
the individual outlet’s load rating.
• The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
• Do not attempt to modify the PDU, including its input plugs and power cables.
• Do not attempt to use the PDU if any part of it is damaged.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Never attempt to install electrical equipment during a thunderstorm.
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
• Network interface enables remote power monitoring and event notification
• Digital amp meter for on-site load monitoring
• Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s
free PowerAlert Network Management System
• Optional ENVIROSENSE accessory allows monitoring of network ambient temperature,
humidity and up to three dry contacts
• Toolless button-mount installation in Tripp Lite SmartRack™ and many third-party enclosures
• Network interface enables remote power monitoring and individual outlet control
• Individually controllable outlets allow remote rebooting of locked-up network devices
• Digital amp meter for on-site load monitoring
• Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s
free PowerAlert Network Management System
• Optional ENVIROSENSE accessory allows monitoring of network ambient temperature,
humidity and up to three dry contacts
• Toolless button-mount installation in Tripp Lite SmartRack and many third-party enclosures
201112142 933151.indb 2 1/24/2012 2:09:50 PM