Filter
Top Products
http://www.tyan.com
112
button, password, hotkey, or power button. Note: If you use the keyboard
password option to power on your system, the power button will be disabled.
KBC Input Clock
Allows you to adjust the keyboard clock signal.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you install an add-in FDC or the
system has no floppy drive, select Disabled in this field.
Onboard Serial Port 1/ 2
Select a logical COM port address and corresponding interrupt for the first and
second serial ports. The second serial port offers infrared options in the next
field.
UART Mode
Select an operating mode for the second serial port:
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
Onboard Parallel Mode
Select a mode for the onboard parallel port.
PWRON After PWR Fail
This option enables the system to: (1) always power on when power is
restored following a power outage; (2) always remain off when power is
restored following a power outage; or (3) restore / maintain the last power
status before power failure.
dradnatStroplairesC232-SR
RISPHtropderarfnilairestnailpmocADrI
RIKSAtropderarfnideyektfihsedutilpmA
BIOS 2
Award BIOS Configuration