Filter
Top Products
38
>>Session Time Out
>>MAC Address
Off
0080-8842-8B00
Session Time out
time setting
5 levels of time setting
(off, 10sec, 20sec,
30sec, 60sec)
Display of MAC
address
When IP Sec type is
"not setting ", it is
fixed at Off.
MENU
MENU
MENU
EXIT
EXIT
EXIT
EXIT
Exit user mode
MENU
EXIT
>>IPSec mode
Off
Availability of IP Sec
(Off, On)
Displayed of the IP Sec
authentication method
not Setting(no definition),
Preshared(presharing of
key authentication),
Certificate(Public key
certificate))
MENU
From previous page
>Network>
>>Printer Name
PRINTER01
Return to top of the
network settings on
previous page.
MENU
EXIT
ENTER
>>Gateway
192.168.000.001
Default Gateway Setting
•Setting when DHCP is Off.
Press the ENTER
key to enter Address
Setting mode.
See page 39 for
he setting method.
>>IPSec Type
not Setting
Turn off the power then turn it on again
to enable Network settings.
CAUTION
Operation (continued)
MENU
RESET
ENTER
>>IP Address OK?
000.000.000.000
Enters to setting mode.
000.000.000.000
∗
Use the ↑↓ keys to
change the value of the
digit at the ∗ symbol.
To increase, use ↑ key
To decrease, use ↓ key
000.000.000.000
∗
Use the RESET and MENU
key to change the digit
at the ∗ symbol.
RESET
Use RESET key to
move the * symbol
to the left (← )and
MENU key to move
it to the right (→ )
MENU
192.000.000.000
∗
Move to the digits to be
changeed and use the
↑↓ keys to change
the Value.
192.168.000.001
∗
EXIT
ENTER
>>IP Address OK?
192.168.000.001
MENU
Use the EXIT key to
return to the original
setting
Use the MENU key to
proceed to the next
setting.
>>Subnet Mask
255.255.255.000
If the adress displayed
matches the address you
want to set,pressthe
ENTER key to save.
Input method Address Setting mode
To enter IP Address, Subnet Mask and Default
Gateway using Network Setting from the printer, press
Enter key at each setting screen to go into the Address
Setting mode.
Use the following procedures to set the address.