Filter
Top Products
16
3.
Plug the other end of this cable into the port located on the back
panel of the scanner.
Macintosh Connection
1.
Turn off your computer and unplug the power cord.
2.
Locate the USB cable that is provided. Plug one end of it firmly
into one of the USB ports. iMac computer ports are located on
the right side of the computer, or at either side of the keyboard.
The USB port on other Macintosh computers is located on the
back panel of the computer, or on a USB interface card.
3.
Plug the other end of this cable into the port located on the back
panel of the scanner.
Connecting the Parallel Port Cable
1.
Turn off your computer and unplug the power cord.
2.
Locate the parallel cable included with your scanner. Connect
the 25-pin parallel interface cable to your PC’s parallel port.