Filter
Top Products
State Scanning
Press or and the
scanner scans through police, fire or
Ambulance Frequencies and "SCAN" scrolls from
right to left in the display.
When in the State Scan mode, press and
the menu of states will appear.
Press
The scanner will scan through Factory
Programmed Police Frequencies and
appears in the display.
Press
The scanner will scan through Factory
Programmed Fire Frequencies and
appears in the display.
Press The scanner will scan
through Factory Programmed Ambulance
Frequencies, appears in the
display.
When the scanner finds a signal, scanning stops, the state code and the frequency displays.
When the transmission ends, the two seconds delay feature (if you set on) holds the scanner
on that frequency for a response. If there is no response, scanning resumes. (See Delay
page 28)
1. While State scanning, press . The menu of
states will appear (See State Code Order Appendix:
page 56).
2. Press and hold to scroll.
3. To step forward through the states (A-W), press
and, within 3 seconds, press repeatedly.
4. To step backward through the states (W-A), press
and, within 3 seconds, press repeatedly.
POLICE, FIRE AMBULANCE
STATE
POLICE.
”POLICE”
FIRE.
”FIRE”
AMBULANCE.
”AMBULANCE”
STATE
STATE
STATE
STATE
Selecting the State