Uniden UBCT8 Scanner User Manual


 
UNIDEN AUSTRALIA PTY
LIMITED
SERVICE DIVISION
UNIDEN NEW ZEALAND
LIMITED
SERVICE DIVISION
345 Princes Highway,
Rockdale,
NSW 2216,
AUSTRALIA
Fax: (02) 9599 3278
www.uniden.com.au
150 Harris Road,
East Tamaki,
Auckland,
NEW ZEALAND
Fax: (09) 274 4253
www.uniden.co.nz
Start Remote Mode and Change Transfer Speed:
RMT
E
1. Press and hold for 2 seconds to activate the Remote
mode.
2. Select the transfer speed except for , then press and
the scanner will start Remote mode.
A unique feature of the UBCT8 is that all the front panel keys on the radio remain operational
in Remote mode.
For information on purchasing UBCT8 Scanner software to program and control your
UBCT8,
you can contact the following:
PC Control Parameter
For your information:
Transfer speed : 9600/19200/38400/57600 bps (adjustable)
Start/Stop bit : 1 bit, 1 bit
Data Length : 8 bit
Parity Check : None
Code : ASCII code
Flow Control : None
Return Code : Carriage Return only
You will need to purchase a RS232C straight cable a null modem adapter. RS232C straight
cables are available as male to male or male to female. Even if the RS232C straight cable
you buy already has the male to male connectors, you will still have to have the null modem
adapter. On the next page you will see the pin connections that are internal to a standard
device. (These items are available at your local electronics stores.)
Clone Mode