Filter
Top Products
2
SPECIFICATIONS
CLP-100 Series
CLP-200 Series
Indexing and Non-Indexing Models
Mounting Configurations
Printing Dies
Ink Rolls
QUICK START
Installing the Inking System Assembly
Installing the Pre-Inked Roll
Installing the Printing Dies
Adjusting the Ink Roll Eccentric
BASIC PRINCIPLES OF OPERATION
Inking System
Using the 4 Oz. Reservoir Ink Cartridges
Selecting an Appropriate Ink
Ink Drying Time Considerations
WEB PRINTING
Mounting the Coder
Special Web Printing Applications
Printing on Narrow Web Materials
Printing directly on Master Rolls
Gang Mounting
CARTON PRINTING
Carton Alignment
Die Positioning for Indexing Applications
MAINTENANCE
Pre-Inking a New Ink roll
Cleaning the Transfer Roll
Cleaning the Coder
Cleaning the Printing Dies
Mounting Configuration Conversion
Inking System Assembly
PARTS DIAGRAMS & PARTS LISTS
IMPORTANT NOTE
UNIVERSAL products are manufactured to exacting standards and every available step has been taken to assure your
complete satisfaction. It is most important, however, that the instructions contained in this manual are read and carefully
followed for best results. Failure to do so may result in unsatisfactory performance, damage to the equipment and personal
injury.
- LIMITED WARRANTY -
UNIVERSAL Non-Porous Conveyor Line Printers are guaranteed to be free from defects in materials and workmanship
for a period of 90 days from the date of purchase. Components found to be defective during this time will be repaired
free of charge if returned to the factory. Damage resulting from use of improper inks, improper installation, or operation
is not covered under the scope of this warranty. For warranty service please contact our Customer Service Department.
3
4
5
6
6
7
8
9
10
14
15
16
16
17
18
20
21
21
21
22
23
25
27
28
28
29
30
37
39
PREFACE