Filter
Top Products
28 Setting Up the Projector
Connecting an RGB Video Source
You can connect to an RGB video source using a VGA computer
cable.
1. Connect the cable to the RGB video port on your player and the
Computer (Component Video) port on the projector.
2. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 60).
3. If you want to play sound through the projector, see page 32 for
instructions on connecting audio cables.
When you’ve finished making connections, see page 35 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
You can purchase a VGA
computer cable from an
electronics dealer.
Computer (Component Video) port