Univex 700 Projector User Manual


 
52 Presenting With the Remote Control
6. To display a slideshow of all the images in the current folder, use
the arrow buttons to highlight
Slideshow on the bottom of the
Slideshow screen and press
Enter. The images display sequentially
one time through. At the end, you see the folder display again.
Select the following as necessary to control your display or slideshow:
To move back up a folder level, highlight Back to Top at the top
of the Slideshow screen and press
Enter.
To select a different device to display from, highlight Select
drive
, press Enter, and select the device.
If all the images in a folder do not fit on the Slideshow screen,
highlight
Next page and press Enter to display the next screen
full of images (or select
Previous page to select the previous
screen).
To exit the slideshow, press Esc, select Exit, and press Enter.
Selecting Slideshow Display Options
To select slideshow options or add special effects, follow these steps:
1. Highlight
Option at the bottom of the slideshow screen and press
Enter. You see this screen:
note
To display a slideshow from
a folder that is not open,
highlight the folder and press
the
Esc button on the
remote control. Then select
Slideshow from the menu
that appears and press
Enter.
To begin a slideshow from a
particular image, use the
arrow buttons to highlight
that image, press
Enter,
then press Enter again.