Filter
Top Products
1
U.S. Robotics Wireless
MAX
g USB Adapter
Installation
Package Contents:
Prepare for installation
You must have administrator rights on your computer in order to install this product.
You will need to install this Installation CD-ROM on all the PCs on which you plan to install
Wireless MAXg USB Adapters.
You must be using Windows XP (Service Pack 1 or higher) or 2000 (Service Pack 4 or higher).
For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed
information.
If you are installing only a Wireless MAXg USB Adapter, go to the
section entitled Installing JUST the Wireless MAXg USB Adapter.
Installing BOTH a Wireless MAXg Router and the
Wireless MAXg USB Adapter
Step One: Connect the Wireless
MAX
g Router
A. Turn off your computer and your cable or DSL modem.
Disconnect the modem’s Ethernet cable from your com-
puter and connect it to the WAN port of the Wireless
MAXg Router.
B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to
one of the LAN ports of the Wireless MAXg Router.
C. Connect the antenna to the Wireless MAXg Router.
D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-
let. Turn on your computer.
USR5421 Wireless MAXg USB Adapter Installation CD-ROM which includes User Guide
Quick Installation Guide