Filter
Top Products
Omni 3350 Installation Guide
18
Perform a Power-On Printer Test
To ensure the printer is operating correctly:
1. Turn off power to the terminal.
2. Hold down the paper feed button and turn on the terminal.
The printer test starts, then stops after a few seconds.
When the test begins printing, release the paper feed
button.
The test printout, with printer information and repeating
character strings, is about 38 centimeters (15 inches) long.
3. Press the paper feed button to advance the paper roll a few
centimeters (inches), then tear off the test printout.
Congratulations! Your Omni 3350 terminal should now be
completely installed and ready to use.
Step 7: Install/Replace MSAM Cards
When you first receive your Omni 3350 terminal, you may
need to install a merchant smart card, or one or more
micromodule-size SAM (MSAM) cards. Or you may need to
replace old cards with new ones. The directions below describe
both procedures.
Caution: Observe standard precautions for handling
electrostatically sensitive devices. Electrostatic discharges can
damage this equipment.
1. Turn off power to the terminal.
2. To install a merchant smart card, grip the SAM drawer and
pinch the locking lever (Figure 10). If the drawer already
O3350 IG 19496 Book.book Page 18 Wednesday, April 5, 2000 10:30 PM