Filter
Top Products
21
Omni 3350 Installation Guide
Figure 13 Using an MSAM Cardholder
8. Remove any previously-installed MSAM card by sliding
the card from the cover.
9. Install an MSAM card by aligning the card and carefully
sliding it within the guides on the cover until fully
inserted.
Note: The cardholder connector base has a set of contacts and
a notch post on one corner to ensure the MSAM card is
positioned correctly when the cover is closed. The MSAM card
has a notch on one corner to ensure it fits into the connector
base in only one way. Before inserting the MSAM card,
position it as shown in Figure 13, with the card’s gold contacts
facing the terminal’s base.
10. Pivot the cover into its connector base (Figure 13).
11. Lock each MSAM cardholder by sliding its locking plate,
as shown by the LOCK arrow, until the plate stops
(Figure 12).
O3350 IG 19496 Book.book Page 21 Wednesday, April 5, 2000 10:30 PM